Powrtouch Manual Engagement Quick Start Guide
Quick Start Guide for Powrtouch Manual Engagement Models.
Ensure you are disconnected from the mains supply!
Unplug the mains cable completely.
Step 1: Switch on the Isolator Switch
Turn the isolation key clockwise.
Step 2: Turn on the handset
Press both green buttons and immediately release.
Step 3: Engage the rollers
Step 4: Manoeuvre your caravan
Use the direction arrow buttons on the handset to move in the direction indicated.
Step 5: Disengage the rollers
Step 6: Turn off the isolator switch
Turn the isolation key anti-clockwise and remove.
Information from powrtouch.com
PLEASE NOTE: The Motor Mover manufacturer deals with any problems that may arise, and will send out their own engineer if required, T&C apply.
While we have made every attempt to ensure that the information on these pages has been obtained from reliable sources, Adventure Leisure Vehicles Ltd is not responsible for any errors or omissions, or for the results obtained from the use of this information. All information on this page is provided “as is”, with no guarantee of completeness, accuracy, timeliness or of the results obtained from the use of this information, and without warranty of any kind, express or implied, including, but not limited to warranties of performance and fitness for a particular purpose. In no event will Adventure Leisure Vehicles Ltd including employees be liable to you or
anyone else for the decision made or action taken in reliance on the information on these pages or for any consequential, special or similar damages.